Ford Transit Cutaway 350 HD in Riverside

The 138-inch wheelbase gives the 2027 Transit Cutaway 350 HD XL a unique advantage in urban environments and confined job sites. Businesses that frequently navigate crowded streets, loading docks, parking structures, and tight service areas benefit from the vehicle's responsive handling and maneuverability.

The 2027 Ford Transit Cutaway 350 HD XL incorporates modern safety and driver-assist technologies designed to support confidence on the road. Available safety systems help drivers maintain awareness of surrounding traffic and potential hazards while navigating busy streets, highways, and job sites.

Businesses that transport equipment, cargo, tools, or specialized machinery require a vehicle that can handle substantial weight without sacrificing reliability. The 2027 Ford Transit Cutaway 350 HD delivers an impressive 11,000-pound GVWR, allowing operators to maximize payload capacity while maintaining confident performance.

The dual rear wheel configuration significantly enhances the 2027 Ford Transit Cutaway 350 HD's stability and load-carrying capabilities. By distributing weight across four rear tires, the vehicle can better manage heavier payloads and specialized upfits while maintaining confident handling characteristics. For businesses that require consistent performance under demanding conditions, the DRW setup provides additional support and improved road stability.

The 2027 Ford Transit Cutaway 350 HD platform is powered by a 3.5L V6 engine paired with a 10-speed automatic transmission, a combination designed to deliver both responsive torque and highway efficiency for commercial duty cycles. In similar configurations, output is typically tuned for strong mid-range performance, supporting stop-and-go urban delivery routes as well as sustained highway travel.

Inside the cab, the Transit Cutaway 350 HD XL trim focuses on durability and functionality rather than luxury, making it ideal for commercial use. The seating layout supports two occupants, with ergonomic controls designed for long-duty cycles and frequent stop-and-go driving. Ford's commercial cab design emphasizes visibility, ease of entry and exit, and straightforward instrumentation, all of which are critical for fleet drivers who spend extended hours on the road.

A Transit Cutaway is designed to serve as the starting point for a wide range of vocational applications, and the 2027 Ford Transit Cutaway 350 HD XL takes that mission seriously. The 138-inch wheelbase offers a balanced footprint that can support many upfit configurations while remaining manageable in everyday driving and jobsite use. With its 9,950 GVWR rating, this model is engineered to handle demanding commercial workloads, giving businesses the confidence to build out a vehicle that fits their exact operational needs.

One of the standout features of the 2027 Ford Transit Cutaway 350 HD XL AWD is its Intelligent All-Wheel Drive system. Designed to automatically adjust power distribution between the front and rear wheels, AWD helps improve traction in challenging weather and road conditions. Businesses operating in regions with rain, snow, dirt roads, or varying terrain can benefit from enhanced control and confidence behind the wheel.

Inside the 2027 Ford Transit Cutaway 350 HD XL trim, the focus is on practicality and durability. The layout is straightforward, with easy-to-clean materials and controls designed for repetitive commercial use. Modern connectivity features such as smartphone integration, Bluetooth capability, and available driver-assist technologies improve usability without distracting from the vehicle's core vocational purpose.

As a cutaway model, the 2027 Ford Transit Cutaway 350 HD XL is specifically built to serve as a foundation for custom commercial bodies. The exposed rear frame allows upfit manufacturers to install cargo boxes, service compartments, ambulance modules, or passenger shuttle bodies with ease. Ford's engineering focus on structural rigidity ensures that the chassis remains stable even under heavy loads and long-term commercial use.

The 2027 Ford Transit Cutaway 350 HD XL AWD is engineered for commercial operators who need maximum structural strength, predictable handling, and flexible upfit capability. Built on Ford's heavy-duty Transit platform, this configuration blends a dual rear wheel chassis, extended wheelbase, and all-wheel-drive traction system to support demanding vocational applications such as shuttle bodies, box trucks, utility builds, and specialty fleet conversions.

The 156-inch wheelbase provides a balanced foundation for a wide range of body installations while maintaining predictable handling characteristics. This length is especially popular for fleet operators who require a versatile mid-length platform that can accommodate box bodies, ambulance modules, or delivery configurations without sacrificing maneuverability in urban environments.

At the heart of the 2027 Transit Cutaway 350 HD XL is a 3.5-liter V6 engine tuned for commercial-grade output and reliability. In this configuration, the engine delivers approximately 275 horsepower and is paired with a 10-speed automatic transmission designed to optimize torque delivery and highway efficiency under load.

The 9,950 GVWR rating places the 2027 Ford Transit Cutaway 350 HD XL in a highly strategic category for commercial users seeking strong payload capability while maintaining operational flexibility. This rating supports substantial upfit configurations without exceeding key regulatory thresholds in certain fleet applications.

At the core of the 2027 Ford Transit Cutaway 350 HD XL is a reinforced chassis engineered for commercial durability. The 9,950-pound GVWR rating places it in a sweet spot for operators who need substantial payload capacity without stepping into higher regulatory thresholds in many use cases. The DRW configuration improves rear-end stability, especially when the vehicle is fully upfitted and loaded, helping distribute weight more effectively across the rear axle.

The cutaway chassis design eliminates the rear cargo body, allowing upfitters to install custom-built solutions tailored to business needs. This flexibility is one of the strongest advantages of the 2027 Ford Transit Cutaway 350 HD lineup. The 156-inch wheelbase supports a wide range of body lengths and configurations, from compact utility boxes to extended shuttle bodies.

The 2027 Ford Transit Cutaway 350 HD XL with the 178-inch wheelbase is a key feature for operators who require expanded body configurations. This longer platform supports a wide range of upfit applications including larger cargo boxes, mobile workshops, food service builds, and shuttle-style passenger conversions. The extended wheelbase improves weight distribution across the chassis, reducing stress concentration on the rear axle assembly.

The 2027 Ford Transit Cutaway 350 HD is known for its upfit versatility. The chassis is designed to accept a wide variety of aftermarket and OEM-approved body installations, enabling businesses to customize the vehicle for specific operational needs. Common applications include box trucks for last-mile delivery, shuttle buses for passenger transport, refrigerated cargo builds, utility service bodies for trades, and specialty vocational builds for municipal fleets.

At the core of this configuration is its 11,000-pound Gross Vehicle Weight Rating, which places it firmly in the heavy-duty segment of the 2027 Ford Transit Cutaway 350 HD lineup. This higher GVWR allows operators to carry more demanding upfit bodies and payloads without compromising structural integrity or performance margins.

The 2027 Ford Transit Cutaway 350 HD XL AWD stands out as a highly capable commercial platform designed for serious upfitting and fleet durability. With its reinforced chassis, advanced traction capability, and long-wheelbase flexibility, it delivers a dependable foundation for businesses that need consistent performance, maximum stability, and scalable build potential across a wide range of commercial applications.

With a Gross Vehicle Weight Rating of 9,950 pounds, the 2027 Ford Transit Cutaway 350 HD XL offers substantial carrying capacity while remaining practical for numerous commercial applications. The robust chassis is designed to support a variety of upfit solutions without compromising performance or reliability. Businesses involved in logistics, construction, maintenance services, transportation, and mobile operations can benefit from the vehicle's ability to accommodate demanding workloads while maintaining operational efficiency.

The 2027 Ford Transit Cutaway 350 HD incorporates modern technology features that help businesses improve efficiency and vehicle management. Connectivity solutions, driver-assistance technologies, and available fleet management tools support productivity while helping drivers stay informed and connected. These systems can assist with route optimization, vehicle monitoring, and operational oversight, making the Transit Cutaway a valuable asset for businesses seeking to streamline their operations.

The 2027 Ford Transit Cutaway 350 HD XL AWD is designed for businesses that require a durable, adaptable, and capable commercial vehicle platform. Combining Ford's Heavy-Duty Transit architecture with intelligent All-Wheel Drive capability, this cutaway model provides an outstanding foundation for a wide variety of vocational upfits.

The dual rear wheel setup further enhances load-carrying capability and vehicle stability. Whether carrying heavy equipment to a job site or transporting products throughout a delivery route, the 2027 Ford Transit Cutaway 350 HD provides the durability necessary for daily commercial use.